DS-15 MFR Standard Rifle

Dark Storm Industries

$1,995.00
(No reviews yet) Write a Review
SKU:
DSI-DS15-6C9-MFR-ST5-BLK
UPC:
496377080576

DS-15 Modern Fighting Rifle

The Dark Storm Industries MFR, or Modern Fighting Rifle, is the true definition of a battle-ready firearm. Our goal from the start was to create a platform that incorporated both new and innovative features as well as those found on rifles at a much higher price point. Designed from the ground up to incorporate features that are well thought out and with the shooter in mind. No detail has been overlooked, from the sourcing of the highest-grade American materials and finishes to the addition of full ambidextrous controls; we have succeeded in producing a truly reliable platform for a price point that cannot be matched. The end result far exceeds our initial expectations, as we are sure it will be yours.

Starting at the muzzle, you will notice our W.T.F. Flash Hider. Developed to reduce muzzle flash, testing has shown it reduces the visible light signature by over 20% when compared to a standard A2 Flash Hider.

The 15-inch Free Float handguard has M-Lok where you need it, and we have left material where you don’t. This reduces radial flex and provides a stable platform to mount the optics and lasers of your choice. It is mated to the upper with a robust barrel nut that doubles as a heat sink, increasing heat transfer from the chamber area of the barrel and prolonging the service life of the rifle. The MFR handguard also incorporates our “Chainlink” handguard to upper tether, eliminating any chance of lateral or forward movement. As a failsafe, we have included two removable stainless dowels between the upper and handguard, not only for indexing but also to remove any chance of movement.

Under the handguard, you will find our sub-MOA 16” SOCOM profile barrel. Machined from MIL-Spec 4150CMV steel, it features a black nitride heat treatment for durability and corrosion resistance. The barrel is chambered in 5.56 NATO to CIP headspace specifications. It is button-rifled with a 1 in 9 twist that is optimized for M193 ammunition. It is a carbine-length, direct impingement gas system that features a robust gas block pinned in place for long-term hassle-free operation. It is also available in a 1 in 7 twist with a midlength gas system for the suppressed nation.

No design feature or upgrade was ignored in the development of this rifle. The 7075 forged upper features a serviceable steel pin for the ambi charging handle to latch onto, as well as a countersunk E-clip for peace of mind when running this rifle hard. It also includes an additional rear Picatinny rail slot to accommodate backup sights with optics that have shorter eye relief.

The low shelf 7075 forged lower features ambidextrous controls for both the offhanded and downhand shooter. The ambi bolt catch locks back and drops the BCG with ease as the dual ejectors pitch your brass in a consistent and repeatable pattern no matter how fast you run the investment cast two-stage trigger with its 4.5lb total pull and short reset. No matter what hand you use, changing the mag is a breeze with the ambi mag release. Faster mag changes keep you in the fight. The bolt carrier group features an advanced nitride DLC finish from ArmorLube, which was developed by the US Army Research and Development Engineering Command. It provides an 80% reduction in friction and 15x reduction in wear compared to CLP lubricated manganese phosphate/hard chrome based on ARDECOM testing.

The Magpul SL stock is adjustable to 6 positions on our milspec buffer tube, which has the SOCOM drain holes and triple rear vent holes for proper expulsion of gas and water should the fight take you there. It also pairs nicely with the matching high angle Magpul K2 grip.

With full attention to detail, we clear anodize the upper, lower, and handguard in type III undyed hardcoat, and finally, finish it off in the cerakote gen 2 IR signature reduction coating which vastly reduces the rifle's signature under night vision when exposed to infrared illumination.

All in all, if you are looking for a truly reliable firearm that features all the upgrades you would expect to find at a much higher price point, then your search stops here. The MFR will meet or exceed every expectation you have in a fighting rifle and is sure to become your go-to for ease of operation and reliability.

Available Finishes: Black, Flat Dark Earth and Olive Drab Green

Every firearm is hand assembled and individually tested at our factory in Rockledge, Florida with All American Made Components and Materials

LIFETIME WARRANTY - Fully Transferable, No Registration or Proof of Purchase Required

TECHNICAL SPECIFICATIONS

Precision Matched Receiver Set • Machined from US Produced 7075 T651 Aluminum
• Mil-Spec Type III Class 2 Hardcoat Anodized Finish
• Cerakote Gen 2 IR Signature Reduction Coating (Black) per MIL-DTL-44436
Forged MFR Ambi Lower Receiver • Ambidextrous Bolt Catch and Release
• Ambidextrous Magazine Release
• Threaded Bolt Catch Screw
• Extended Takedown and Pivot Pins
Forged MFR Upper Receiver • Mil-Spec Pinned (not glued) Forward Assist
• Threaded Forward Assist Retaining Screw
• Mil-Spec Dry Film Lubricant Applied to Bore
• Serviceable Steel Pin for Charging Handle Retention
• Additional Rear Pic Rail Slot
Full Ambidextrous Controls • DSI Chinook Ambidextrous Charging Handle
• DSI Billet Ambidextrous 90° Safety Selector
• Premium Investment Cast (not MIM) Two Stage Trigger 4.5lb
• Ambidextrous Bolt Catch and Release
• Ambidextrous Magazine Release
DSI Mil+ Dual Ejector Bolt Carrier Group • M16 Style 8620AQ Bolt Carrier
• 9310AQ Dual Ejector Bolt
• Sprinco Enhanced 5 Coil Extractor Spring and O-Ring System
• Sprinco Cryogenic Treated Gas Rings
• Armor Lube Nitride / DLC Coated Bolt Carrier Group per MIL-PRF-32711
DSI 16" SOCOM Profile Barrel • Premium 4150 CMV Steel Certified to MIL-B-11595E
• Button Rifled 1:7 or 1:9 Twist (1:8 .300 Blackout)
• Carbine or Mid Length Gas System
• Black Nitride Heat Treat Finish
DSI Mil+ Carbine Buffer System • Upgraded Neoprene Dampened Buffer with Hi Durometer Bump Stop
• Electropolished 17-7 Stainless Steel Buffer Spring For Smoothness
• Impact Extruded 7075 Buffer Tube with 6 Positions and Drain / Vent Holes
• Mil-Spec Dry Film Lubricant in Buffer Tube Bore
• Dual Staked QD Socket End Plate and Castle Nut
Included Accessories • 30 Round Polymer Magazine
• Keyed Cable Lock

Related Products